T.7 type LED traffic light with flashing mode
It is used as an additional equipment in unregulated pedestrian crossings to attract the attention of drivers to improve road safety.
LED impulse display, especially at twilight and night time, allows you to identify a pedestrian crossing or intersection from a long distance and provide a safe driving regime in advance.
Structurally, the product is made in the housing of the traffic light section with a diameter of the output aperture of the signal Ø300mm.
As the light source, yellow LEDs are used in traffic lights, which allows to reduce power consumption and provide a long service life.
The traffic light housing is made of a shock-resistant polymer material resistant to UV radiation.
The traffic light is manufactured in the UKhL climatic version, category 1 according to GOST R 52282-2004.
Light emitting diodes
|Supply voltage, V||176-242|
|Frequency of mains, Hz||50 ± 0,5|
|Consumed power in flashing mode, W||below 5|
|Axial force of light, cd||above 400|
|Diameter of light aperture, mm||300|
|Overall dimensions (with a visor and brackets), mm||376х376х188|
|Operating temperature range, °С||from -40 °С to +60 °С|
|Degree of protection||IP54|
|Service life||10 years|